|
| |
Austedan Fabrications list of
equipment and machinery capabilities include the following items:
Cutting/Drilling
-
All off our
flat sheet metal shapes drawn on AutoCAD 2D drawing or on our duct developing
programme “Plate and sheet” and we have access to a laser cutter where we have
normally have a 1-2 day turn around.
-
ACL 6mm Mild
Steel or 4mm Stainless Steel x 2.5m guillotine c/w auto backstops
-
Bauer fully
automatic 30° forward 45° rear vertical bandsaw c/w self feeder and can change
angles automatically along length of material.
-
Stantrite
Manual Bandsaw H250m
-
Rusch Auto
Hitch rear bandsaw 250 section
-
Cold Saw
-
Asada 50mm
automatic pipe threading machine
-
Auto feed gear
head drilling/tapping machine 12 speed Model # GHD 45A.
-
Makita
aluminium combination docking saw – LS1214 – 305ø
-
60 tonne
Sunrise punch and shear machine
-
2 only 240
volt magnetic rotabroach drilling machines
Pressing
-
100 Tonne x 4m YSD Brake Press c/w Dallem Controller to operate back stops and
auto angle fold changes.
-
Horizontal 25 tonne flatbar/section press
-
Porta power hydraulic repair equipment
-
Motorised hydraulic RHS and pipe bender – 180° capacity
-
Bramley hydraulic hand pipe bender
Rollers
-
ACY Pacific 5mm plate rollers c/w sectional flange rolling attachments 1620mm
wide
-
3”ø motorised sheet metal rollers x 1270mm long
-
2” ø John Heine hand sheet metal rollers x 990mm long
Welding
-
Lincoln Dual Torch power wave MIG-455 M/STT
-
6 only RediMIG 325 Lincoln MIG welders 415 volt
-
1 only RediMIG 455 Lincoln MIG welder 415 volt
-
1 only Lincoln TIG inverter – V305-T, AC/DC pulse – 415 volt
-
1 only Lincoln AC/DC TIG square wave 175amps – 415 volt
-
5 only Lincoln V160, 240 volt DC pulse TIG welders
-
1 only Liquid Arc 130amp, 240 volt TIG/Stick welder
-
1 only Proarc 100kg capacity welding rotator c/w foot pedal control
-
4 only welding bays set up with welding fume extraction for hazardous
situations
-
Oxy/Acetylene and LP gas heating, cutting and welding
-
SIP spot welder Model # PL15
General
-
1 only large 3 phase 4” wide x 4270mm long belt linisher c/w buffing
attachment on second side
-
1 only 6” pedestal grinder
-
1 only hand operated SJ2 Bramley Jenny machine – 1.6mm material
-
Normal array of electric grinders, drills, rotary burrs Quantity of hand tools
-
Ladders and step ladders
-
Laser measuring and levelling equipment
-
Various chain blocks
-
Safety harnesses and roofers safety lanyard kits.
-
Site personnel OH&S Green Card inducted and EWP Certified.
Vehicles
-
Toyota 2.5 tonne LPG dual front wheel forklift c/w certified extension tynes
and lifting jib attachment
-
5 tonne site truck set up with 5 roller shutter lockable storage components
for tools and site equipment.
-
3 off 1 tonne petrol utes c/w front, middle and rear racks for carrying long
sections
|
